Foxconn RC4107MA-8KRS2 User Manual download pdf (Page 54)

Chapter 3 BIOS Description

PnP/PCI Configurations

vReset Configuration Data

This option is used to set whether the system is permitted to automatically

distribute IRQ DMA and I/O addresses when each time the machine is turned

on. The setting values are: Disabled and Enabled.

vResources Controlled By

This option is used to define the system resource control scheme. If all cards

you use support PnP, then select Auto (ESCD) and the BIOS will automatically

distribute interruption resources. If the ISA cards you installed do not support

PnP, you will need to select “Manual” and manually adjust interruption

resources in the event of hardware conflicts. However, since this motherboard

has no ISA slot, this option does not apply.

v IRQ Resources

Only when the “Resoureces Controlled By” is set as “Manual” can this option

be modified. Press the <Enter> key, then manually set IRQ resources.

vPCI/VGA Palette Snoop

If you use a nonstandard VGA card, use this option to solve graphic

acceleration card or MPEG audio card problems (e.g., colors not accurately

displayed). The setting values are: Disabled and Enabled.

vAssign IRQ For VGA

Most modern graphics cards require an IRQ to function properly. Disabling

this feature with such cards will cause improper operation and/or poor

performance. Enabled: For most modern graphics cards. Disabled: disable

this feature to release an IRQ for other uses.

PnP/PCI Configurations Menu

PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 88 89

No comments

Foxconn RC4107MA-8KRS2 User Manual Page 54