Foxconn G41MD Series User Manual

G41MD Series Motherboard User’s Manual

313Back Panel 1 x PS/2 Keyboard portConnectors 1 x PS/2 Mouse port 1 x PS/2 Mouse port 1 x Serial port1 x Serial port

141-2 LayoutNote : The above motherboard layout is for reference only, please refer to the physical motherboard for detail.17181419 9720 14816216 151

5151. PS/2 Mouse PortUse the upper port (green) to connect a PS/2 mouse.2. PS/2 Keyboard PortUse the lower port (purple) to connect a PS/2 keyboard.3.

16ActiveLEDLinkLEDLAN TypeLeft: Active Right: LinkStatus Description Status Description1000MOff No Link Off No LinkGreen BlinkingData ActivityOff 10 M

This chapter introduces the hardware installation process, including the installation of the CPU, memory, power supply, slots, pin headers and the mou

8282-1 Install the CPU and CPU Cooler Install the CPULocate the alignment keys on the motherboard CPU socket and the notches on the CPU. Re

929Follow the steps to install the CPU onto the CPU socket :1. Remove protective socket cover.Remove protective socket cover. 2. Release the CPU socke

10210Install the CPU CoolerFollow the steps below to correctly install the CPU cooler on the motherboard. (The following procedures use

112112-2 Install the MemoryDual Channel Memory CongurationThis motherboard provides two DDR3 memory sockets and supports Dual Channel Technology. Whe

12212Installing a MemoryIf you take a look at front side of memory module, it has asymmetric pin counts on both sides separated by a not

Statement:This manual is the intellectual property of Foxconn, Inc. Although the information in this manual may be changed or modied at any time, Fox

132132-3 Install an Expansion CardFollow the steps below to correctly install your expansion card in the expansion slot.1. Locate an expansion slot th

142142-4 Install other Internal ConnectorsPower ConnectorsThis motherboard uses an ATX power supply. In order not to damage any device, make sure all

15215Audio Connector : F_AUDIOThe audio connector supports HD Audio standard. It provides the Front Audio output choice. Speaker Connector : SPEAKERTh

16216Front Panel Connector : FP1This motherboard includes one connector for connecting the front panel switch and LED Indicators.Hard Disk LED Connect

172172-5 JumpersFor some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use th

18218USB device wake-up Jumper: USBPWR1 / USBPWR21. Set the jumper to pins 1-2 (+5V) to wake up the computer from S1 sleep mode using the connected US

19219Over Memory Frequency Jumper: MEM_OC_1333When you use the memory which supports 1333/1066, the jumper is used to overclock memory frequency. and

20220Install driver and utilityThis motherboard comes with one Utility CD, after installing the Operating System,You can simply put it into your CD/DV

212212. Utility Use these options to install additional software programs.

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.You have

Declaration of conformityHON HAI PRECISION INDUSTRY COMPANY LTD66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,TAIPEI HSIEN, TAIWAN, R.O.C.declares

323Enter BIOS SetupThe BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintai

324► Power Management SetupAll the items related with Green function features can be setup through this menu.► PC Health StatusThis setup enables you

325System InformationThis sub-menu is used to set up the standard BIOS features, such as the date, time, oppy drive and so on. Use the arrow up/down

326Model name of this product.► BIOS VersionIt displays the current BIOS version. User can check this information and discuss with the eld service pe

327Advanced BIOS Features► MPS RevisionThis feature is only applicable to multiprocessor motherboards as it species the version of the MPS that the m

328► Quick BootWhile Enabled, this option allows BIOS to skip certain tests while booting, this will shorten thetime needed to boot the system.► Bootu

329Fox Central Control Unit► Smart BIOS / CPU Configuration / Voltage OptionsPress <Enter> to go to its submenu.► Spread SpectrumIf you enabled

330Smart BIOS► Smart Power LEDSmart Power LED is a feature built on your motherboard to indicate different states during Power-On Self-Test (POST). Th

331CPU Conguration ► C1E SupportC1E represents Enhanced HALT State. It is a feature which Intel CPU uses to reduce power consumption when in halt st

332CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.Voltage Options Voltage Options Help Item DRAM Voltage Control

Declaration of conformityTrade Name: FOXCONN Model Name: G41MD Responsible Party: PCE Industry Inc. Address: 458 E. La

333Advanced Chipset Features► North Bridge Conguration/ South Bridge CongurationPress <Enter> to go to its submenu.North Bridge Conguration►

334the time the memory controller srart sending commands to memory bank. The lower the value, the sonner the memory controller can send commands out t

335South Bridge Conguration► SMBUS ControllerThe System Management Bus is a specic implementation of an I2C bus. The SMBus speci-cation describes t

336Integrated Peripherals► IDE Configuration/OnBoard Configuration/SuperIO Configuration/USB Configuration Press <Enter> to go to relative subme

337OnBoard Conguration► OnBoard Audio ControllerThis item is used to enable or disable the onboard Audio Controller.► OnBoard LAN ControllerThis item

338SuperIO Conguration► Serial Port1 AddressThis item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port 1.► S

339USB Conguration ► Legacy USB SupportThis item is used to enable the support for USB devices on legacy OS. If you have a USB keyboard or mouse, s

340Power Management SetupACPI (Advanced Conguration and Power Interface) is an open industry standard interfaces enabling OS-directed conguration, p

341► ACPI Suspend TypeThis item is used to set the energy saving mode of the ACPI function. When you select “S1(POS)” mode, the power is always on and

342PC Health Status► Warning TemperatureThis option is used to set the warning temperature for the system. When the temperature ofCPU is higher than t

Installation Precautions Please carefully read the following procedures to install your computer : It is suggested to select high-quality, certie

343BIOS Security Features► Change Supervisor PasswordThis item is used to install or change supervisor password.After you input Supervisor password, i

344Load Optimal DefaultsOptimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after

Table of ContentsChapter 1 Product Introduction Product Specications ...2

Technical Support :Website :http://www.foxconnchannel.comSupport Website :http://www.foxconnsupport.comWorldwide online contact Support :http://www.fo

Thank you for buying Foxconn G41MD Series motherboard. Foxconn products are engineered to maximize computing power, providing only what you nee

121-1 Product SpecicationsCPU Support LGA 775 socket Intel® CPU, Max processor power up to 95w For the latest