Foxconn RC4107MA-8KRS2 User Manual download pdf (Page 32)

Chapter 2 Installation Instructions

Starting up for the first time

1.After making all the connections, replace the system case cover.

2.Be sure that all switches are off.

3.Turn on the devices in the following order.

a. Monitor

b. External SCSI devices (starting with the last device on the chain)

c. System power

4. After applying power LED on the system, front panel case lights up. For ATX

power supplies, the system LED lights up when you press the ATX power

switch. If your monitor complies with green standards or if it has a power

standby feature, the monitor LED may light up or switch between orange

and green after the system LED turns on. The system then runs the power-

on tests. While the tests are running, the BIOS beeps or additional

messages appear on the screen. If you do not see anything within 30

seconds from the time you turned on the power, the system may have failed

a power-on test. Check the jumper settings and connections or call your

retailer for assistance.

5.At power on, hold down <Delete> to enter BIOS Setup. Follow the instructions

in Chapter 3.

Powering off the computer

1.Using the OS shut down function

If you use windows 2000/XP, click the start button, click Shut Down, then click

the OK button to shut down the computer. The power supply should turn off after

Windows shuts down.

2.Using the dual function power switch

While the system is ON, pressing the power switch for less than 4 seconds puts

the system to sleep mode or to soft-off mode, depending on the BIOS setting.

Pressing the power switch for more than 4 seconds lets the system enter the

soft-off moderegardless of the BIOS setting.

PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 88 89

No comments

Foxconn RC4107MA-8KRS2 User Manual Page 32