Foxconn P31A Series User Manual download pdf (Page 32)

Chapter 2 BIOS Description

3.1 CPU Feature

You can press <Enter> to set the items of CPU feature.

3.2 Hard Disk Boot Priority

This option is used to select the priority for HDD startup. After pressing

<Enter>, you can select the HDD using the Up/Down arrow keys, and change

the HDD priority using <+>/<-> or <PageUp>/<PageDn> keys ; you can exit

this menu by pressing <Esc>.

3.3 Hyper-Threading Technology

This option is used to enable or disable Hyper-Threading technology.

3.4 First/Second/Third Boot Device

This option allows you to set the boot device’s sequence.

3.5 Boot Other Device

While enabled, the system will boot from some other devices if the first/

second/third boot devices failed.

3.6 Boot Up Floppy Seek

This option controls whether the BIOS checks for a floppy drive while booting

up. If it cannot detect one (either due to improper configuration or physical

unavailability), it will appear an error message.

3.7 Boot Up NumLock Status

This item allows you to select the power-on status for the NumLock. The

available setting values are: On and Off.

3.8 Full Screen Logo Show

This option allows you to enable or disable the full screen logo.

3.9 Small Logo (EPA) Show

This item allows you to enable or disable the EPA logo.

4.Integrated Peripherals

Integrated Peripherals Menu

4.1 OnChip IDE Device

This sub-menu is used for the configuration of IDE devices. You can press

PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 44 45

No comments

Foxconn P31A Series User Manual Page 32