Foxconn 45CSX User Manual download pdf (Page 35)

► Serial Port 1 Address

This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial

port.

► Serial IRDA Address

This item is used to assign the I/O address and interrupt request (IRQ) for the IRDA port.

► IRDA Port Duplex Mode

This item enables you to determine the infrared function of the onboard infrared chip.

► Parallel Port Address

This item is used to assign the I/O address for the onboard parallel port.

► Parallel Port Mode

This item is used to set parallel port mode.

► Parallel Port IRQ

This item is used to assign interrupt request (IRQ) for the onboard parallel port.

USB Conguration

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB

keyboard or mouse, set to auto or enabled.

► USB 1.1 Controller

This item is used to enable or disable the Universal Host Controller Interface for USB.

► USB 2.0 Controller

This item is used to enable or disable the Enhanced Host Controller Interface for USB.

If USB devices are connected to the computer, the following item will appear :

► USB Storage Configuration

After pressing <Enter>, you can set the reset delay for the USB storage device. There are many

different emulation types of this USB device, such as oppy, hard disk and CDROM can be

selected.

USB Conguration

Help Item

Module Version - 2.24.1-13.4 Enables support for

legacy USB. AUTO

USB Devices Enabled :

option disables

1 Drive legacy support if

Legacy USB Support [Enabled] no USB devices are

USB 1.1 Controller [Enabled] connected.

USB 2.0 Controller

[Enabled]

► USB Storage Configuration

[Press Enter]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[Enabled]

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 64 65

No comments

Foxconn 45CSX User Manual Page 35