D52S/D42SMotherboard User’s Manual
31 CPU/System fan speed detection CPU overheating shutdownGreen Function Low power consumption and power management features Support ACPI (Adv
411-2 LayoutNote : The above motherboard layout is for reference only, please refer to the physical motherboard for detail.1. TPM Connector 2. Front
511-3 Back Panel Connectors 1. PS/2 Mouse PortUse the upper port (green) to connect a PS/2 mouse.2. PS/2 Keyboard PortUse the lower port (purple) t
618. RJ-45 LAN PortThe Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate. ActiveLEDLinkLEDLAN TypeLeft: Active Right:
This chapter introduces the hardware installation process, including the installation of the CPU, memory, power supply, slots, pin headers and the mou
822-1 Install the MemoryIf you take a look at front side of memory module, it has asymmetric pin counts on both sides separated by a notch in the midd
922-2 Install other Internal ConnectorsPower ConnectorsThis motherboard uses an ATX power supply. In order not to damage any device, make sure all the
102USB Connectors : F_USB1/2In addition to the four USB ports on the rear panel, this product also provides two 10-pin USB headers on its moth
112Front Panel Connector : FP1This motherboard includes one connector for connecting the front panel switch and LED Indicators.Hard Disk LED Connector
122Audio Connector : F_AUDIO1The audio connector supports HD Audio standard. It provides the Front Audio output choice. Fan Headers : CPU_FAN1, SYS_FA
Statement:This manual is the intellectual property of Foxconn, Inc. Although the information in this manual may be changed or modied at any time, Fox
1322-3 JumpersFor some features needed, users can change the jumper settings on this motherboard to modify them. This section explains how to use the
This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.You hav
153Enter BIOS SetupThe BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintai
163devices such as Serial I/O and other USB devices... etc.All the items related with Green function features can be set up th
173System InformationThis submenu is used to set up the standard BIOS features, such as the date, time, IDE channel and so on. Use the arrow up/down k
183The system boot will not stop for a keyboard error if you enabled this item.The system boot will not stop for a mouse error if you enabled t
193This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking time is
203This item is used to enable/disable the quiet boot.[Disabled] : Displays the normal POST messages.[Enabled] : Displays OEM customer log
213ule offers facilities for secure generation of cryptographic keys.The TPM �ork Group is chartered to create the Trusted Platform Module (TPM) speci
223Press <Enter> to go to its submenu.This option is used to auto d
Declaration of conformity HON HAI PRECISION INDUSTRY COMPANY LTD66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,TAIPEI HSIEN, TAIWAN, R.O.C
233Smart BIOSSmart Power LED is a feature built on your motherboard to indicate different states during Power-On Self-Test (POST). Th
243This menu shows most of the CPU specications.This item is used to enable or disable CPUID maximum value lim
253Press <Enter> to go to its submenu.This ite
263This item is used to set DRAM frequency. Setting values are: [Auto], [667 MHz], [800 MHz].
273Select [Disabled] to set the parameters by yourself.The following 4 settings are valid only when the Congure DRAM Timing by SPD is set to [Disable
283
293[AHCI], [Disabled].This item is used to enable or disable the HDA controller.
303When enable, the suspend power of the NM10 Express chipset will be cut off in S5 suspend mode; when disable, the
313This item is used to enable the support for USB devices on legacy OS. If you have a USB keyboard or mouse, set
323ACPI (Advanced Conguration and Power Interface) is an open industry standard interfaces enabling OS-directed conguration, p
Declaration of conformityTrade Name: FOXCONN Model Name: D52S/D42SD52S/D42S Responsible Party: PCE Industry Inc. Address: 458 E. Lambert Rd.
333This item is used to set the energy saving mode of the ACPI function. When you select “S1(POS)” mode, the power is always on and
343PC Health StatusThis option is used to set the warning temperature for the system. When the temperature ofCPU is higher than t
353BIOS Security FeaturesThis item is used to install or change supervisor password.After you input Supervisor password, i
363Load Optimal DefaultsOptimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after
The utility CD that came with the motherboard contains useful software and several utility drivers that enhance the motherboard features.This chapter
384Utility CD contentThis motherboard comes with one Utility CD. You can simply put it into your CD/DVD-ROM drive, and the main menu will be displayed
394You must click "Intel Chipset Driver" to install it rst. After that, you can click "One
404FOX ONEFOX ONE is a powerful utility for easily modifying system settings. It also allows users to monitor various temperature values, voltage valu
414ToolbarUse the toolbar to navigate to other pages.Alert LampWhen the system is in healthy state, the color of alert lamp is green. When
424Skin ButtonThere are more choices of FOX ONE screen panels. Click this button, you can select your favorite skin (FOX ONE Panel).Click this but
Installation Precautions Please carefully read the following procedures to install your computer : It is suggested to select high-quality, certie
434This menu allows you to congure : 1). Monitor interval (ms) :This is to dene the interval of different messages of system setting
444Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Yes.Step 2 : After data is collected, it will ask you to restart yo
454This page lets you select (or overclock) CPU clock to meet the current performance level of the system. The fast
464You can see the system is raising CPU clock until the system hangs.Push RESET button on the front panel of your system to restart the computer.Run
474Select FOX Intelligent Stepping will allow your system to automatically adjust your CPU clock rate based
484This page lets you to set CPU high limit temperature and enable the alert function.
494This page lets you to set CPU fan low limit rpm and enable the alert function.This page le
504This page lets you to set FAN1 fan low limit rpm and enable the alert function.
514This page lets you enable Smart Fan function or set the fan speed by manual.When Smart Fan is selected, you must use a 4-p
524FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by local or online.Supporting Operati
TABLE OF CONTENTSChapter 1 Product Introduction Product Specications ...2 Layout ...
5341-2 Local Update - BackupThis page can backup your system BIOS. You can click “Backup”, and key in a le name, then click “Save” to nish the backu
5442. Online Update2-1 Online Update - Update BIOSThis page lets you update your system BIOS from Internet. Click “start”, it will search the new BIOS
5542-3 Online Update - Update UtilityThis page lets you update utilities from Internet. Click “start”, it will search the new utilities from Internet.
5642-4 Online Update - Update AllThis page lets you update your system drivers from Internet. Click “start”, it will search all new BIOS/drivers/utili
574This page lets you set auto search options. After you enable the auto search function, FOX LiveUpdate will start it
584When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older, it will auto search from internet and prompt you t
594This page lets you select to ash BIOS / Boot Block and clear CMOS. If you choose Flash Boot Block, it means BIOS is not prot
604FOX LOGOFOX LOGO is a simple and useful utility to backup, change and delete the boot time Logo. The boot Logo is the image that appears on screen
614FOX DMIFOX DMI is a full Desktop Management Interface viewer, and it provides three DMI data formats : Report, Data Fields and Memory Dump. With DM
Limit Setting ... 48 Voltage Control ...
Thank you for buying Foxconn D52S/D42S motherboard. Foxconn products are engineered to maximize computing power, providing only what you need f
21CPU Intel® AtomTM D520 processor mounted onboard (D52S) Intel® AtomTM D420 processor mounted onboard (D42S)Chipset In
Hello, im noob :)