Foxconn Cinema Deluxe User Manual download pdf (Page 21)

Front Panel Connector : FP1

This motherboard includes one connector for connecting the

front panel switch and LED Indicators.

Hard Disk LED Connector (HDD-LED)

Connect to the chassis front panel IDE indicator LED. It

indicates the active status of the hard disks. This 2-pin

connector is directional with +/- sign.

Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front

panel of the case; the system will restart when the switch

is pressed.

Power LED Connector (PWR-LED)

Connect to the power LED indicator on the front panel of

the chassis. The Power LED indicates the system’s status.

When the system is in operation (S0 status), the LED is

on. When the system gets into sleep mode (S1) , the LED

is blinking; When the system is in S3/S4 sleep state or

power off mode (S5), the LED is off. This 2-pin connector

is directional with +/- sign.

Power Switch Connector (PWR-SW)

Connect to the power button on the front panel of the

chassis. Push this switch allows the system to be turned

on and off rather than using the power supply button.

Chassis Intrusion Alarm Header : INTR

The connector can be connected to a security switch on the

chassis. The system can detect the chassis intrusion through

the function of this connector. If eventually the chassis was

closed, the system will send a message out.

Speaker Connector : SPEAKER

The speaker connector is used to connect speaker of the

chassis.

EMPTY

HDD-LED

RESET-SW

PWR-SW

PWR-LED

FP1

Connect a 4-pin

power plug

SPKJ

EMPTY

SPEAKER

SPKJ

INTR

GND

INTRUDERJ

We recommend you using an 8-pin ATX 12V power supply. If

you are using a 4-pin power supply, you need to align the ATX

power connector according to the picture on the right.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 113 114

Comments to this Manuals

No comments

Foxconn Cinema Deluxe User Manual Page 21

Comments to this Manuals

Related products and manuals for Motherboard Foxconn Cinema Deluxe