Foxconn nT-i1200 User Manual download pdf

All images are for reference only, please refer to the physical NanoPC for detail.P/N:3A251KH00-000-G

1. On tabletop 2. In Seatbase

Placement of NanoPC

3. On display back

3.1. Use four screws to fasten the VESA Mount

onto the display back.

3.2. Fit the NanoPC into the VESA Mount with power

button locating at the top for easy touch.

1 2 3

1. Unscrew four screws (A) on the top

cover.

2. Put an Opening Tool between the

cover and case then move it to the

other side to remove the top cover.

3. Fasten it with one screw (A). 1. Fasten Mini PCIe add-on Card to

Mini PCle Half Card Support.

2. Plug the pin side of the Mini PCIe

add-on Card into the socket

slantwise, then press it down gently.

Install Mini PCIe add-on Card

1. Plug the pin side of the memory

module into the socket slantwise.

2. Press it down firmly.

Install memoryOpen the case

Connection of NanoPC

SD/MMC/MS

Please refer to the diagram to connect devices to NanoPC.

1. HDD

2. HDD Bracket

3. Mini PCIe Half Card Support

4. Mini PCIe add-on Card

5. Memory

6. Screw cover

7. Magnet Rubber Foot

8. Seatbase

9. VESA Mount

10. DVI to VGA Adapter(Optional)

11. Power Cord

12. Power Adapter

13. Screw(A, B, C, D)

A. M2.43X4.85 mm (9x): To fasten HDD Bracket and Case

B. M2.92X2.85 mm (3x): To fasten HDD to HDD Bracket

C. M2.42X2.85 mm (1x): To fasten Mini PCIe add-on Card to Mini PCIe Half Card Support

D. M3.90X9.70 mm (4x): To fasten VESA Mount to display

14. USB Flash Disk(With Driver, Utility, User’s Manual and Easy Guide in it)

Components

1. ESD Wrist Strap

2. ESD Gloves

3. Opening Tool

Tools Needed

4 5

2. Fasten the top cover with four screws

(A) . Stick the screw cover on the four

screw holes.

1. Install the top cover.

2. Fasten them with three screws (B). 3. Install HDD into the socket on the

motherboad gently.

4. Fasten the HDD bracket with four

screws (A).

Install Hard Disk Drive (HDD)

1. Insert the HDD into the HDD bracket

slantwise first, then press it down.

Install the case

USB Keyboard

Display

LAN

Power adapter

Microphone

Headphone

USB devices

USB Mouse

HD TV

Speaker device

USB Flash Disk

Memory card

1 2

Summary of Contents

Page 1 - Install the case

All images are for reference only, please refer to the physical NanoPC for detail.P/N:3A251KH00-000-G1. On tabletop 2. In Seatbase7Placement of NanoPC

Page 2 - Mini PCle 半卡支架上。

简体中文繁體中文1> 打开机壳 1. 将上盖的四颗螺丝(A)拧开。2. 将开盒器插入机壳与上盖之间，然后将其划向另一侧打开上盖。2> 安装内存1. 将内存条倾斜的插入内存插槽内。2. 向下按压内存条，使其固定。 3> 安装Mini PCIe 附加卡1. 将Mini PCIe 附

Related models: nT-i1250 | nT-i1500 |

Comments to this Manuals

No comments

Foxconn nT-i1200 User Manual

Browse online or download User Manual for Computer hardware Foxconn nT-i1200. Foxconn nT-i1200 User Manual

Summary of Contents

Related models: nT-i1250 | nT-i1500 |

Comments to this Manuals

Related products and manuals for Computer hardware Foxconn nT-i1200