Foxconn A76GMV User Manual download pdf (Page 15)

Pin-1 corner of the

CPU socket

Pin-1 triangle

marking of CPU

1. Release the CPU socket lever.

2. Align Pin-1 of the CPU with the CPU

socket, and gently put the CPU

onto the socket.

Read the following guidelines before you begin to install the CPU:

■ Make sure that the motherboard supports the CPU.

■ Always turn off the computer and unplug the power cord from the power supply before

installing the CPU to prevent hardware damage.

■ Locate the Pin-1 of the CPU. The CPU cannot be inserted if oriented incorrectly.

■ Apply an even and thin layer of thermal grease on the surface of the CPU.

■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating

and damage of the CPU may occur.

■ Set the CPU host frequency in accordance with the CPU specications. It is not

recommended that the system bus frequency be set beyond hardware specications

since it does not meet the standard requirements for the peripherals. If you want to

set the frequency beyond the standard specications, please do so according to your

hardware specications including the CPU, graphics card, memory, hard drive, etc.

2-1 Install the CPU and CPU Cooler

Install the CPU

Locate the Pin-1 CPU triangle mark and the Pin-1 of the CPU socket.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Chrishem 26 Apr 2024 | 04:32:19

Hello, im noob :)

Foxconn A76GMV User Manual Page 15