Foxconn P41A-G User Manual download pdf (Page 17)

Install the CPU Cooler

Follow the steps below to correctly install the CPU cooler on the motherboard. (The following

procedures use Foxconn cooler as the example.)

1. Apply and spread an even thermal

grease on the surface of CPU.

2. Place the four bolts of the CPU

cooler to the holes of the motherboard,

push them straight down from the top,

and the bolts will be fastened on the

motherboard. That's it.

3. Check the solder side of the

motherboard, the push pin should be

xed as depicted in the picture.

4. Attach the 4-wire CPU cooler

connector to the CPU FAN header

on the motherboard .

Release bolts of CPU cooler from

motherboard :

1.Tu r n i n g the push pin (bolt)

along with the direction of arrow

(counterclockwise).

2. Pull the push pin straight up.

3. Turning push pin clockwise to its

default position.

Use extreme care when removing the CPU cooler because the thermal grease may

adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

No comments

Foxconn P41A-G User Manual Page 17