Foxconn Bloodrage User Manual download pdf (Page 46)

USB Device Setting

► USB 1.0 Controller

This item is used to enable or disable the Universal Host Controller Interface for USB.

► USB 2.0 Controller

This item is used to enable or disable the Enhanced Host Controller Interface for USB.

► USB Operation Mode

This item is used to set the USB operation mode. If you select the [High Speed], then the USB

operation mode is determined by the USB device; select [Full/Low Speed], the USB device

operates on full/low speed.

► USB Storage Function

This option is used to set whether the USB Mass Storage controller is enabled in a legacy

operating system (such as DOS).

► ***USB Mass Storage Device Boot Setting***

BIOS auto detects the presence of USB Mass Storage Devices, you can congure the Boot

setting mode for the detected USB MSD.

Phoenix - AwardBIOS CMOS Setup Utility

USB Device Setting

USB 1.0 Controller Enabled Item Help

USB 2.0 Controller

Enabled

USB Operation Mode High Speed Menu Level ►

USB Storage Function Enabled

[Enable] or [Disable]

*** USB Mass Storage Device Boot Setting *** Universal Host

Controller Interface

for Universal Serial

Bus

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F7:Optimized Defaults

Enabled

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 126 127

No comments

Foxconn Bloodrage User Manual Page 46