Foxconn 865M01-G-6ELS User Manual download pdf (Page 37)

Chapter 2 Installation Instructions

865M01G/PE/GV User Manual

1394 Header: 1394 HDER (Optional)

The 1394 expansion cable can be connected to either the front (provided that

the front panel of your chassis is equipped with the appropriate interface) or

real panel of the chassis.

GND

VCC

B -

GND

A -

1394 HDER

VCC

B +

GND

Empty

A +

Wake-Up On LAN: WOL

Through the Wake-Up On LAN function, a wake event occurring from the net-

work can wake up the system. To utilize this function, please be sure an ATX 12V

power supply with a 5VSB line capable of delivering a current of at least 720mA,

and a LAN adapter which supports this function. Then connect the header to the

relevant connector on the LAN adapter, set “Wake up by PCI Card” to enabled in

the “POWER MANAGEMENT SETUP” section of the CMOS SETUP. Save and

exit, then boot the operating system once to make sure this function takes effect.

5V _SB_SYS

GND

WOL

LAN wake up

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 110 111

No comments

Foxconn 865M01-G-6ELS User Manual Page 37