Foxconn NT-I2847 User Manual

nT-i2000 series NanoPC User’s Manual

252-1 Placement of NanoPC1. On the Desk 1.1. You can install your NanoPC in the Seatbase like the right image. 1.2. If there is enough spac

26 2.2. Fit the NanoPC into the Vesa Mount with power button locating at the top for easy touch.Lift up the NanoPC straightly to take it out. CAUTION

272-2 Connection of NanoPC1. Connect the Monitor Connect a monitor to the NanoPC through VGA connector.2. Connect the USB Devices Connect US

284. Connect the Power Cord Connect the power adapter to the power input port of the NanoPC, and push the power button to start it. The power ad

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.You have

310Enter BIOS SetupThe BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintai

311Main MenuThe BIOS Setup is accessed by pressing the <Del> button after the Power-On Self-Test (POST) memory test begins and before the operat

312Advanced► Miscellaneous/Integrated Periperals/SATA Configuration Press<Enter>to go to relative submenu.Miscellaneous

313Integrated Peripherals USB Configuration Onboard USB3.0 Controller [Enabled] PCH Azalia Configuration Azalia [Enabled] ↑ ↓

314AHCI mode is not available under Windows XP, please select IDE mode. CAUTION!SATA configuration SATA Controller(s) [En

Trademark:All trademarks are the property of their respective owners.Version:User’s Manual V1.1 for nT-i2000 series NanoPC. Symbol description:C

315Power► Restore on AC Power Loss This item is used to set which state the PC will take with when it resumes after an AC power loss. ► Dee

316Power ► Lan Wakeup This item is used to control the wake onboard Lan from S3/S4/S5 function and S1 not sup

317Security ► Administrator Password StatusThis item is used to install or change

318BootOptions ► Launch CSM This item controls if CSM will be launched. WARNING: This option is for advanced users.► Launch

319Save & Exit ► Save Changes and Exit If you select this option and press <Enter>, a message will be displayed in the scre

320► Load User Default ValuesIf you select this option and press <Enter>, a message will be displayed in the screen. Select [Yes] to restore/loa

This chapter introduces the following information: Install Windows 7/8 Install Drivers in Windows 7/8

422Make sure you have these ready :1. NETDVD. (It is an optional accessory. If there is no NETDVD in this package, you need other purchase an external

4235. After that, it will start Windows and come out a “Install Windows” dialog box to set the “Lan- guage to install”, “Time and current format” a

4249. In this biggest hard disk size screen, you can click “New” button to create partitions as you need. In this example, we will create a 70GB p

Before using this product, please read the below safety notice carefully, this will help to extend the product’s lifecycle, and work normally. Wh

42510. From this step we start to install Windows 7/8 into your hard disk, including copying Win dows les, expanding Windows les...etc. During

426Install Drivers in Windows 7/81. When the Windows 7/8 is completely installed, you have to install the necessary drivers before using th

This chapter introduces the following information: FOX WinFlash

285FOX WinFlashFOX WinFlash is a useful utility to backup and update your system BIOS.Supporting Operating Systems : Windows XP (32-bit/64-bit) Wi

2951-2 Local Update - BackupThis page can back up your system BIOS. You can click “Backup BIOS”, and key in a le name, then click “Save” to nish th

3052. About & HelpThis page shows some information about FOX WinFlash.Show information about FOX WinFlash

Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harm

TABLE OF CONTENTSChapter 1 Introduction of NanoPC Top View ...

Accessory ListThanks for choosing our products. Please check the accessories listed below. If there is any-thing broken or lost, please contact with y

This chapter introduces NanoPC’s outlook : Top View Front Side View Back Side View Bottom View

121-1 Top View1-2 Front Side View 1(190mm)7.5in 5.3in(135mm)No. Name Description1 Kensington Lock Attach a Kensington security system or a compatible

131-3 Back Side View1-4 Bottom ViewThere are four Magnet-Metal-Feet in the package. Just align them to the sheet metal on the bottom, then they can ma

In this chapter, the placement and the connection of some neces-sary peripherals will be introduced. This chapter includes the following information: