Foxconn nT-A3800 User Manual

nT-A3800 NanoPC User’s Manual

252-1 Placement of NanoPC1. On the Desk 1.1.You can install your NanoPC in the Seatbase like the right image. To install this bracket, your display

26 2.2. Fit the NanoPC into the Vesa Mount with power button locating at the top for easy touch.Lift up the NanoPC straightly to take it out. CA

272-2 Connection of NanoPC1. Connect the Monitor Connect a monitor to the NanoPC through DVI connector. 2. Connect the USB Devices Connec

283. Connect the Network Cable Connect LAN cable to the RJ-45 port, with the other end connected to a hub or switch.4. Connect the Power Cord

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.You have

310Enter BIOS SetupThe BIOS is the communication bridge between hardware and software, correctly setting up the BIOS parameters is critical to maintai

311Main The BIOS Setup is accessed by pressing the <DEL> or <F2> button after the Power-On Self-Test (POST) memory test begins and before

312Advanced ► SATA ModeThis item is used to set the operating mode of your SATA ports. Setting options: [IDE Mode]; [AHCI Mode].[IDE Mode] - This con

313► Restore on AC Power Loss This item is used to set which state the PC will take with when it resumes after an AC power loss. ► Supporting C6 po

314Boot Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.Aptio Setup Utility - Copyright (C) 2012 American Megatrends,

Trademark:All trademarks are the property of their respective owners.Version:User’s Manual V1.1 for nT-A3800 NanoPC. Symbol description:Cautio

315Security Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.Aptio Setup Utility - Copyright (C) 2012 American Megatr

316Save & Exit ► Save Changes and Exit If you select this option and press <Enter>, a message will be displayed in the screen. S

317By this default, BIOS have set the optimal performance parameters of system to improve the performances of system components. But if the optimal pe

This chapter introduces the Windows installation : Install Windows 7/8 Install Drivers in Windows 7/8

419Make sure you have these ready :1. NETDVD. (It is an optional accessory. If there is no NETDVD in this package, you need other purchase an external

4207. It will then ask you to select the installation type. Click “Custom (advanced)” to install a new copy of Windows.8. The setup will the

4219. In the hard disk size screen, you can click the “new” button to create partitions as you need. In this example we are creating a 70GB pa

42210. The setup program will then start to install Windows 7/8 on your hard disk. During the installa tion, your computer will restart sever

4234-2 Install Drivers in Windows 7/81. When the Windows 7/8 is completely installed, you have to install the necessary drivers before using the NanoP

This chapter introduces the following information: FOX WinFlash

Before using this product, please read the below safety notice carefully, this will help to extend the product’s lifecycle, and work normally. Wh

255FOX WinFlashFOX WinFlash is a useful utility to backup and update your system BIOS.Supporting Operating Systems : Windows XP (32-bit/64-bit) Wi

2651-2 Local Update - BackupThis page can back up your system BIOS. You can click “Backup BIOS”, and key in a le name, then click “Save” to nish th

2752. About & HelpThis page shows some information about FOX WinFlash.Show information about FOX WinFlash

Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harm

TABLE OF CONTENTSChapter 1 Introducing the NanoPC Top View ...

Accessory ListThanks for choosing our products. Please check the accessories listed below. If there is anything broken or lost, please contact with

This chapter introduces NanoPC’s outlook : Top View Front Side View Back Side View Bottom View

121-1 Top ViewNo. Name Description1 Headphone Port Connects to a headphone2Microphone In and SPDIF InPortConnects to a microphone or playback device

131-3 Back Side View1-4 Bottom ViewNo. Name Description1 USB 2.0 Ports Connects to USB devices2 Display Output Port Connects to display device3 HDMI

In this chapter, the placement and the connection of some neces-sary peripherals will be introduced. This chapter includes the following information: